Re:
http://www.fastunlockusa.com How to unlock BlackBerry 6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:
Select Options menu on Blackberry.
Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone: (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code).
Type MEPD for all models except 7100 in which case in case use MEPPD.
Usually you should see active NET lock. Now in order to disable this lock type MEP2 respectively MEPP2 if your phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key" 2.
Now you should see the place to enter your net unlock code. (if not, you didn't type in MEP2 or MEPP2 properly.)
Here you must enter the NET Unlock Code that the Blackberry unlocker showed you and hit return.
How to Unlock BlackBerry 8100 Pearl:
Go to Options Menu => Advanced Options.
In the SIM Card menu, hold down the shift (right of the zero, cap) press MEPPD.
You'll see the unlocking level screen there you hold the ALT key (left side below @) type MEPP2 (You won't see any text while you are typing either one of these.)
Type in the 16 or 8 digits unlock code and your phone is unlocked!
How to unlock T-Mobile US BlackBerry 8100 & 8220:
Below you will see the Instructions for unlocking your Blackberry 8100 Pearl device. Please understand your phone keypad. You MUST know where the Menu key (key with Blackberry logo, right of the Call key), Enter key (right lower corner) and the Alt Key (left lower corner) on the Blackberry 8100 before you starting to proceed to unlock your phone. I recommend you read the instruction one time first before you starting to unlock the phone.
Press the Menu key.
Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless
ON).
Scroll to Options and press the trackball.
Scroll to Advanced Options and press the trackball.
Scroll to SIM Card and press the trackball.
Type MEOOD.
Note: When typing in MEOOD, the letters will not appear on the screen. This
step opens up the personalization on the device.
Press the Alt key and type MEOO, Alt key, type number 2.
Note: When typing in MEOO2 the letters/number will not appear on the screen.
This Step opens up the Enter Network MEP code box.
Enter unlock code.
Press the Enter Key. (Make sure you press the Enter Key within 5 second
or you have to enter the unlock code again).
How to unlock BlackBerry Curve 8300, 8310, 8320, 8830, 8900, 9000 & 9530 Storm:
You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular SIM card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
Power on.
Go to Setting.
Go to advanced options.
Go to SIM card.
Type MEPD.
Type MEP [Alt + 2] (all this with either a Cingular or AT&T SIM inside).
It will ask you for the unlock code. Enter it and your phone is unlocked!
How to unlock T-Mobile US BlackBerry 8320 & 8900 :
Below are the Instructions for unlocking your T-Mobile US Blackberry Curve device.
Press the Menu key.
Scroll to and select Manage Connections. Select Turn All Connections Off.
Press the red end key or the Escape key to go back to the Home screen.
Scroll to and select the Options icon.
Scroll to and select Advanced Options.
Scroll to and select SIM Card.
Type MEPD
Note: When typing in MEPD the letters will not appear on the screen. This
step opens up the personalization on the device.
Hold down the Alt key and type in MEP2.
Note: When typing in MEP2 the letters/number will not appear on the screen.
This Step opens up the Enter Network MEP code box.
Enter the unlock code.
Press the trackball (code accepted should display)
Press and hold the red End key to turn the handheld off and then back
on.
Once the device has powered on, follow steps 1 & 2 and select Restore
Connections.
How to unlock BlackBerry 8700 and 8700c and 8700r:
You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular SIM card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
Go to Setting.
Go to Options.
Go to Advanced Options.
Go to SIM card.
Type MEPD (not case sensitive) (you will not see text appear on screen while typing).
Does it say Network active? if so your phone is locked.
Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing).
It will say Enter Network MEP Code, Type in the 16 or 8 digit unlock code, press in the jog dial to confirm.
Your phone is now unlocked.
How to unlock T-Mobile US Blackberry 8700g:
Below you will see the Instructions for unlocking your device.
WARNING: Make sure Wireless Mode is turned off before proceeding with the following steps. Failure to do so may result in the device being damaged.
On the Home screen, click on Options.
Scroll to and select Advanced Options.
Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
Type MEPD.
You will see the 5 categories of locking:
SIM
Network
Network Subset
Service Provider
Corporate
To unlock Network Personalization hold down ALT and then Press MEPE.
The device will display Enter Network MEP Code.
NOTE: If you never attempted to unlock before, you have 10 attempts to enter the correct code.
Enter the code and press the trackwheel.
How to unlock BlackBerry 8800 & 8820:
You must have a SIM card in your phone to complete these steps (can be active or inactive).
Go to settings Menu => and then Options.
Select Advanced Options => and then SIM card.
Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD).
Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD).
You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digits unlock code and press in the track wheel / jog dial to confirm.
Your phone is now unlocked.
How to unlock T-Mobile US Blackberry 8800 & 8820:
Below you will see the Instructions for unlocking your device.
WARNING: Make sure Wireless Mode is turned off before proceeding with the
following steps. Failure to do so may result in the device being damaged.
Press the Menu key.
Scroll to Options and press the trackball.
Scroll to Advanced Options and press the trackball.
Scroll to SIM Card and press the trackball.
Type MEPD.
Press the Period key twice.
Press and hold the Alt key and type MEP2.
Note: a box will appear asking you to enter the MEP network code.
Type in the unlock code.
Press the enter key or trackball (the device should display "code accepted"
if successfully unlocked)
How to unlock HP iPaq (iPaq 6315, 6325, 6300, 6515, etc):
Insert NON Cingular SIM into device.
Power on the device.
- Wait approximately 30 seconds until the SIM Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code).
Enter the unlock code in the blank field.
Press Ok
- If the unlock code is incorrect, an error dialog will appear.
After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information).
- If the unlock code is correct, a success dialog will appear.
Press Ok.
- The device is now unlocked and should continue booting
OR
On the Today screen, tap Start > Settings.
Tap the Phone Band icon.
The keyboard icon to open the virtual keyboard.
Tap Shift and then Ctrl key to enable the keys.
Tape the blank area below the band selection box to open the unlock tool.
Tap Shift and then Ctrl to disable the keys.
Enter the 8-digit unlock code and tap OK when done.
Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens;
- Unlock successful
- Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional attempts.
- Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
How to unlock HTC, Pantech, Cingular, HP, 8525, 3125, 2125 & all Windows Smartphones, & Windows Pocket PC Phones:
Power on with incorrect SIM, enter unlock code when prompted.
Enter code using onscreen keyboard when unlocking a Pocket PC Phones
***Below are Blackberry instructions that work for most network providers. T-Mobile locked cell phones have to be entered differently and are shown at the end ***
How to Unlock LG (most models):
Insert not-allowed SIM card.
Power on the handset- phone will display "phone restricted".
Select "Cancel" - phone will display "phone restriction code".
Enter the SIM unlock code.
Select "OK" - the handset is now successfully unlocked.
How to Unlock LG C2000:
Insert non-Cingular SIM card.
Power on the handset - phone will display "phone restricted".
Select "Cancel" - phone will display "phone restriction code".
Enter the SIM Unlock code.
Select "OK" - the handset is now successfully unlocked.
How to unlock LG F2250:
With allowed SIM card in the start menu type: 2945#*3311#.
Handset shows saved, and then return to startup screen.
Press Menu key, choose Settings > Security > SIM Lock> Network > Deactivate, handset will now show 'Enter NCK'.
Enter your unlock code and OK.
How to unlock LG CU500 (Cingular/AT&T):
Insert non-Cingular SIM card.
Power on the handset. Phone will display "Invalid SmartChip".
(IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN).
In idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5".
Enter the 8 digit SIM unlock code.
Select "OK". The handset is now successfully unlocked.
How to unlock LG CU575 / Trax:
Put a non Cingular SIM in the phone, phone says invalid smart chip.
Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code.
How to unlock LG KE970 Shine:
Switch ON your phone with an allowed SIM card.
Then enter: 2945#*9701#.
Press CALL.
It should you ask you for the code.
How to unlock LG KG800 or TG800 Chocolate
With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
Go to: Settings>Security>SIM Lock>Network.
Select deactivate. Enter the unlock code
How to Unlock LG TU720 (SHINE):
Power ON your phone with not allowed SIM card (one that didn't come with the phone).
Type *#865625#.
The phone will ask you to input the unlock code twice, just input the unlock code.
Device is now unlocked.
How to unlock LG U8110:
With a not allowed SIM card in your phone enter Pin code then validate. Enter: 277634#*#.
Select 'SIM Unlock' menu #.
Enter NCK code then validate.
Your phone is now unlocked.
How to unlock LG U8150:
Switch ON your phone with a not allowed SIM card.
Enter: 277634#*#.
Go to menu "SIM Lock".
Enter the unlock code.
How to unlock LG U81x:
To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#.
Enter the code.
In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.
How to unlock LG U8210:
With a not allowed SIM card enter Pin code then validate. Enter: 277634#*#.
Shows test Menu.
Choose SIM test menu and type: 2945#*#, choose SIM Unlock Menu.
Handset shows 'Enter NCK'.
Enter code, then hit OK.
How to unlock LG-ALL other Model :
Switch ON your phone with an allowed SIM card.
Then enter:
For LG 510w: Enter: 2945#*5101#.
For LG 1200 & B1200: Enter: 1945#*5101#.
For LG 5200 & 52200: Enter: 2945#*5221#.
For LG 5300: Enter: 2945#*5301#.
For LG 5400: Enter: 2945#*5401#.
For LG 7020: Enter: 2945#*70001#.
For LG 7100: Enter: 2945#*7101#.
For LG 1100: Enter: 2945#*1201# or 2945#*70001#.
For LG 7250T: Enter: 2945#*70001#.
For LG C2200: Enter: 2945#*2201#.
For LG T5100: Enter: 2945#*5301#.
For LG C3310: Enter: 2945#*3311#
Go to "Menu" and then to "Settings"
Then select "Security".
To finish select "Network Provider" and select "Deactivate".
Enter the unlock code.
If your cell phone is not listed, please follow instructions for LG C2000 above.
How to unlock Motorola:
Switch ON your phone with a not allowed SIM Card.
Phone should show "Enter Special or Subsidy Code".
Enter unlock code.
Your phone is now unlocked.
WARNING: If any of these messages appear:
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'
It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
Note: If your phone is on a 3G network enter **057*, then another window will appear to enter the unlock code.
How to unlock Motorola CDMA and TDMA:
Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code.
Enter unlock code.
Your phone will be unlocked instantly.
How to unlock Motorola MPX:
I will supply you with 2 unlock codes. One will be the NETWORK PIN and the other the SERVICE PROVIDER PIN.
Switch ON your phone with a not allowed SIM Card.
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you.
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you.
Your Phone should now be unlocked.
MPX FAQ's:
Question: Phone is asking for NETWORK PUK and a new password twice. I entered the code from you but phone saying "Operation not supported by this SIM card". What should I do?
Answer: If you still have the original card. Please power on the phone with the original card in and when phone fully powered on (You have access to the menu), then
TYPE: * # * * 3 6 4 # and press green button
you'll get a error message and after it your will see: Engineering menu
Click "Options".
Click "GSM Test".
Select "Send AT command".
Now you will see a new window with:
Send AT Command
Type: AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN] "
and press send.
If you get Response "0 []" phone is unlocked.
If you get 1 error, then make sure you have typed the code correct and try the other code.
If you don't have the original card, please switch your phone off, take battery out. Put battery back in, power on the phone. Now the phone it will ask to enter NETWORK PUK. Now please DON'T TOUCH the phone for 2 hours. After 2 hours it will change screen! Now please enter the code received from us and 00000000 (eight zero's) as a new password. Now the phone will be unlocked.
Question: Phone is asking for SERVICE PROVIDER PUK and a new password twice. I entered the code from you but phone saying "Operation not supported by this SIM card". What should I do?
Answer: YOU NEED to have the original card. Please power on the phone with the original card in and when phone fully powered on (you have access to the menu), then
TYPE: * # * * 3 6 4 # and press green button you'll get a error message and after it your see: Engineering Menu:
Click "Options".
Click "GSM Test".
Select "Send AT command".
Now you will see a new window with:
Send AT Command
Type: AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
and press send.
If you get Response "0 []" phone is unlocked.
If you get 1 error, then make sure you have typed the code correct and try the other code.
If you don't have the original card or if the original card is not accepted because you flashed the phone with other firmware, then sorry but we can't help you.
Question: Why do I have to wait 2 hours before I can enter the code when phone asking for NETWORK PUK?
Answer: This is because Motorola have added an anti brute force protection and if you enter to many codes, the phone will ask for NETWORK PUK and then it will refuse to accept the code even if is the right one.
Question: After I restart my phone, the phone is asking again for SERVICE PROVIDER PIN. What shall I do to make it stop?
Answer: Follow the instructions from SERVICE PROVIDER PUK and after that it will never ask for the code again.
How to unlock Nokia:
*** WARNING: please read instructions carefully before starting! ***
Switch ON your phone without SIM Card.
Enter: #pw+yourcode+1# ("YOUR CODE" is meant to be the actual unlock code we gave you).
ie. if your code is 000000000000000 then enter exactly:
#pw+000000000000000+1#
*** IF THE CODE IS REJECTED, DO NOT TRY AGAIN. ***
OR
Switch ON your phone without SIM Card.
Enter: #pw+yourcode+7# ("YOUR CODE" is meant to be the actual unlock code we gave you).
ie. if your code is 000000000000000 then enter exactly:
#pw+000000000000000+7#
The letter P appears after you quickly press 3 times the button star ( * )
The letter W appears after you quickly press 4 times the button star ( * )
The letter + appears after you quickly press 2 times the button star ( * )
The phone shows "SIM Restriction Off" and is unlocked!
IF YOU HAVE TRIED TO PUT IN AN INCORRECT CODE 3 OR MORE TIMES PREVIOUSLY & YOU GET PHONE RESTRICTED SIGN, THEN YOUR DEVICE IS HARD LOCKED AND MUST BE UNLOCKED WITH A CABLE AND HARDWARE BOX.
How to unlock Samsung AT&T/Cingular BlackJack:
Insert NON Cingular SIM into device.
Power on the device.
- Wait approximately 30 seconds until the SIM Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code).
Enter the unlock code in the blank field.
Press Ok.
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information).
- If the unlock code is correct, a success dialog will appear.
Press Ok.
- The device is now unlocked and should continue booting.
OR
Insert disallowed SIM Card (a SIM Card that the phone does not usually accept) and enter unlock codes when prompted.
NOTE: If you are unable to connect to service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone.
Enter *#1546792*#.
Select Option 3 Network & Call Settings.
Select option 5 Network Mode.
Select GSM.
How to unlock Samsung Z105 and Z107:
Switch ON your phone with a not accepted SIM card.
Enter: #7465625*638*YOURCODE# (by "your code" I mean the unlock code we gave you).
How to unlock Samsung 3G, Zxxx & Dxxx, A707 Series:
Switch ON your phone without SIM Card.
Enter: #7465625*638*YOUR CODE# (or *#7465625*638*CODE#) (by "your code" we mean the unlock code we gave you).
How to unlock Samsung Z510 and Z320i:
Switch ON your phone without SIM Card.
Enter: **YOUR CODE# (by "your code" means the unlock code we gave you).
How to unlock Samsung i607/Blackjack WITHOUT SIM:
Power on without SIM, you will then get a message saying "SIM Failure" at the top of the screen.
Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*.
It will display "Enter Network Control Key" this is where you enter the 8 digit unlock code. Then click ok.
Your phone is now unlocked.
How to unlock Samsung - All other Models:
Switch ON your phone with a not accepted SIM card.
Phone will ask for the "Password".
You can now enter the unlock code.
OR
(If phone shows "Insert Correct SIM Card"):
Switch ON your phone with a not accepted SIM card.
Enter: #0111*YOUR CODE# (by "your code" I mean the unlock code we gave you).
How to unlock Sidekick:
Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.
The box will say:
Title: Special Code Required.
Dialog: Enter code to enable SIM.
Box for Code: 1-8 digits.
Options: Enable or Cancel.
In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It's unlocked. Enjoy
In case you see the Waiting for Activation Screen, hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
How to unlock Siemens:
*#0001*YOUR CODE#. # ("YOUR CODE" is meant to be the actual unlock code we gave you).
OR
*#0000*YOUR CODE#. # ("YOUR CODE" is meant to be the actual unlock code we gave you).
How to Unlock Sierra Wireless Aircard:
Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.
How to unlock Sony Ericsson (all models):
If your phone has a "JOGDIAL" (for example Sony Ericsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
For the unlocking of a locked Sony Ericsson no SIM card is required.
Turn on the handset. Display will indicate Insert SIM.
Press the left Arrow (<) button.
Press the star (*) button twice.
Press the left Arrow (<) button again.
You will briefly see one of the following messages listed on devices display: Personalized with MNC2 or Personalized with MNC3.
Wait approximately three seconds.
The display will indicate Network and a picture of a closed lock.
Press Select.
The display will indicate Unlock (Net) 5 and NCK:
Enter the 16 digit NLCK4U code (unlock code we provided you) and press okay.
The handset will display Network unlocked and the display Insert SIM appears.
The handset is successfully unlocked.
How to unlock Treo 180, 270, 750:
Switch ON your phone without SIM card.
Enter: *#*#CODE# (substitute the word "code" with the unlock code we gave you).
OR
Switch ON your phone with a not allowed SIM card.
Enter the unlock code.
Important Note: On some models the Num Lock is not automatically enabled so make sure it is ON before entering the unlock code.
How to unlock Treo 650, 680:
Remote Treo battery, unplug cable.
Insert incorrect not allowed SIM card (one the phone does not accept).
Power on your Treo, "SIM not allowed" is displayed, click "ok".
Go to the dial pad, and use the stylus to enter code *#*#YOUR CODE#. Then press Dial. (Substitute the word "your code" with the unlock code we gave you).
Phone will reset and display "SIM lock removed".
Ensure you enter the codes in this manner *#*#YOPUR CODE# (e.g. *#*#12345678#)
Troubleshooting:
Error Message: "The SIM Lock has NOT been removed from this phone".
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#YOUR CODE# dial.
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
How to unlock Treo 750:
Insert a not allowed SIM card.
Place the battery and the cover, windows will boot automatically.
Turn on the phone by pressing the front upper-right red button on the keypad
The phone will ask for the unlock code.
Pull out the stylus pen at the back of the phone; tap the keyboard icon at the center-bottom of the screen.
Enter the unlock code by tapping your stylus pen on the screen keyboard. Then tap OK.
Your Palm Treo phone should be unlocked by now.
OR
Switch ON your phone with allowed SIM card.
Go to menu and select "Phone Tool" or "Phone Application".
Type on virtual keyboard *#*#YOUR CODE# (substitute the word "your code" with the unlock code we gave you).
Select with PEN "Number" and phone will show that it's unlocked.
OR
Power on with Non-Cingular SIM.
Using physical keyboard hold down key with large white dot (lower left hand corner of keyboard) while typing numbers on the keyboard.